1.4362, X2CrNiN23-4, UNS S32304

1.4362, X2CrNiN23-4, UNS S32304 Stainless Steels to EN 10028-7

1.4362, X2CrNiN23-4, UNS S32304 - Specification & Application

  • EN 10028-7 - Flat products made of steels for pressure purposes - Part 7: Stainless steels
  • EN 10088-1 - Stainless steels - Part 1: List of stainless steels
  • EN 10088-2 - Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
  • EN 10088-3 - Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
  • EN 10088-4 - Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
  • EN 10088-5 - Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
  • EN 10216-5 (2004) - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
  • EN 10217-7 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
  • EN 10250-4 - Open die steel forgings for general engineering purposes - Part 4: Stainless steels
  • EN 10253-3 - Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
  • EN 10253-4 - Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
  • EN 10272 - Stainless steel bars for pressure purposes
  • EN 10296-2 (2005) - Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
  • EN 10297-2 (2005) - Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel

Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel

Chemical composition(wt.%) of 1.4362, X2CrNiN23-4, UNS S32304 grade: to EN 10028-7

Elements Min.（≥） Max.（≤） Similar Remarks
C - 0.030
Si - 1.00
Mn - 2.00
P - 0.035
S - 0.015
Cr 22.00 24.00
Mo 0.10 0.60
Ni 3.50 5.50
N 0.05 0.30
Cu 0.10 0.60

Mechanical properties of grade 1.4362, X2CrNiN23-4, UNS S32304 grade: to EN 10028-7

Yield Strength,Rp 0.2(MPa)

Condition Min Max Similar Note
400

Tensile Strength,Rm(MPa)

Condition Min Max Similar Note
600 850

Impact,Kv/Ku(J)

Condition Min Max Similar Note
KV20℃ 100

Elongation,A(%)

Condition Min Max Similar Note
25

Reduction of area,(%)

Condition Min Max Similar Note

Hardness

Condition Type Min Max Similar Note
HB 260

Physical properties of grade 1.4362, X2CrNiN23-4, UNS S32304 EN 10028-7

Modulus of elasticity, E Note
200 GPa
Thermal capacity, cp20℃ Note
500 J ⋅ kg-1 ⋅ K-1
Thermal conductivity, λ Note
15 W ⋅ m-1 ⋅ K-1

1.4362, X2CrNiN23-4, UNS S32304 - Detail

Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel

The steel supplied most often in the form of bars, plates and pipes is used in the manufacture of tanks for chemical compounds, responsible screws, sleeves, valves, shafts, stirrers, desalination systems, flanges, pumps, pipelines as well as radiators and for the construction of aircraft structures.Duplex 1.4362 / X2CrNiN23-4 has a high resistance to acid environments and stress corrosion. It is a great, much better alternative to austenitic 316L / 1.4404 stainless steel and can also be used interchangeably with 1.4460 / X3CrNiMoN27-5-2. Grades are used in the paper, petrochemical and fuel industries, chemical, shipbuilding, nitrogen, aerospace, construction, heat and power generation and cryogenic industries.

Equivalent Grade

1 Q195 2 Q215 3 Q215 B 4 Q235 5 Q235 B 6 Q235 C 7 Q235 D 8 Q255 A 9 Q255 B 10 Q275 11 Y1Cr18Ni9 12 1Cr18Ni9 13 1Cr18Mn10Ni5Mo3N 14 1Cr17Ni7 15 Y1Cr18Ni9Se 16 0Cr18Ni9 17 00Cr19Ni10 18 1Cr17Mn6Ni5N 19 1Cr18Mn8Ni5N 20 0Cr19Ni9N

Equivalent Products

1 SKD-11 Cold working die steel 2 X165CrMoV12 Cold working die steel 3 17-4ph steel wire 4 A387 F5 / Grade 5 Coil / Sheet 5 D2 Round Bar 6 P20 tool steel round bar 7 D3 tool steel round bar/plate 8 T30402/X155CrVMo121 Die Steel Sheet 9 1.4980 Round Bar 10 DT413 / 4Cr5MoSiV1MOD

Product shapes we supply:

We can customize the production of 1.4362, X2CrNiN23-4, UNS S32304 grade, contact us for the best solution.
–sales@specificsteel.com