Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | - | 0.08 | ||
| Si | - | 1.00 | ||
| Mn | 7.50 | 9.00 | ||
| P | - | - | ||
| S | - | - | ||
| Ni | 5.00 | 7.00 | ||
| Cr | 17.50 | 22.00 | ||
| Al | - | - | ||
| Cu | - | - | ||
| Ti | - | - | ||
| Fe | - | - | ||
| N | 0.25 | 0.50 | ||
| Mo | 2.00 | 3.00 |
Drawing Alloy Steel, Sheet and Strip, Hot-Rolled and Cold-Rolled
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 529 (≥) | 571 (≥) | 11 | 21 | 44 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 242 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 887 (≥) | 353 (≥) | 12 | 44 | 24 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 324 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 371 | 469 | 969 |
We can customize the production of A 507 G15216 grade, contact us for the best solution.
–sales@specificsteel.com