| Steel grade | Standard | Application |
|---|---|---|
| X6CrNi18-12 | ISO | ISO standard thermal deformation of stainless steel |
| X7CrNi18-9 | ISO | ISO standard thermal deformation of stainless steel |
| ISO 11 | ISO | ISO standard thermal deformation of stainless steel |
| ISO X5CrNi18-9 | ISO | ISO standard thermal deformation of stainless steel |
| ISO X5CrNi17-7 | ISO | ISO standard thermal deformation of stainless steel |
| ISO X2CrNiN18-7 | ISO | ISO standard thermal deformation of stainless steel |
| ISO 10N | ISO | ISO standard thermal deformation of stainless steel |
| ISO X2CrNiN18-9 | ISO | ISO standard thermal deformation of stainless steel |
| ISO X2CrNi19-11 | ISO | ISO standard thermal deformation of stainless steel |
| ISO X2CrNi18-9 | ISO | ISO standard thermal deformation of stainless steel |
| 20a | ISO | ISO standard thermal deformation of stainless steel |
| X5CrNiMo17-12-3 | ISO | ISO standard thermal deformation of stainless steel |
| 1Cr18Ni12 | GBT | Compared with 0 cr19ni9, processing low hardenability. Used for spinning processing, special drawing, cold heading |
| 00Cr18Ni10N | GBT | In 00cr19ni10 adding N, on the basis of the above grades also features, use the same as the 0 cr19ni9n, but better intergranular corrosion resistance |
| 0Cr19Ni9N | GBT | Based on 0cr19ni9 plus N, strength increase and the plastic is not down. Reduce the thickness of the material. As a structure with strength components |
| 1Cr18Mn8Ni5N | GBT | Nickel steel, instead of 1cr18ni9 |
| 1Cr17Mn6Ni5N | GBT | Nickel steel grade, instead of number 1 cr17ni7 and magnetism after cold working, used in railway vehicle, etc |
| Y1Cr18Ni9Se | GBT | Improve the machinability, ablation resistance. Suitable for automatic lathe production of rivets, screws |
| 1Cr17Ni7 | GBT | High strength after cold forming. Used in railway vehicle, conveyor belt, bolt and nut, etc |
| 1Cr18Mn10Ni5Mo3N | GBT | Of urea with good corrosion resistance, can produce urea corrosion of the equipment. |
| 1Cr18Ni9 | GBT | High strength after cold forming, but elongation than 1 cr17ni7 slightly worse. Used in architectural decoration parts |
| Y1Cr18Ni9 | GBT | Improve the machinability, ablation resistance. Suitable for automatic lathe production of bolt and nut |
| GS-50CrV4 | DIN | |
| 1.8159 | DIN | |
| 1.7909 | DIN | |
| GS-20MnCrMo6 3 | DIN | |
| 1.7906 | DIN | |
| GS-19MnCrMo6 3 | DIN | |
| 1.7903 | DIN | |
| GS-18MnCrMo6 3 | DIN | |
| GS-36CrMoV10 4 | DIN | |
| 1.7756 | DIN | |
| 1.7755 | DIN | |
| GS-35CrMoV10 4 | DIN | |
| GS-30CrMoV6 4 | DIN |