X1NiCrMoCu25-20-5, 1.4539, AISI 904L, N08904 Stainless Steels to EN 10028-7

X1NiCrMoCu25-20-5, 1.4539, AISI 904L, N08904 - Specification & Application

  • EN 10028-7 - Flat products made of steels for pressure purposes - Part 7: Stainless steels
  • EN 10088-1 - Stainless steels - Part 1: List of stainless steels
  • EN 10088-2 - Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
  • EN 10088-3 - Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
  • EN 10088-4 - Stainless steels - Part 4: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for construction purposes
  • EN 10088-5 - Stainless steels - Part 5: Technical delivery conditions for bars, rods, wire, sections and bright products of corrosion resisting steels for construction purposes
  • EN 10216-5 (2004) - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 5: Stainless steel tubes
  • EN 10217-7 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 7: Stainless steel tubes
  • EN 10250-4 - Open die steel forgings for general engineering purposes - Part 4: Stainless steels
  • EN 10253-3 - Butt-welding pipe fittings - Part 3: Wrought austenitic and austenitic-ferritic (duplex) stainless steels without specific inspection requirements
  • EN 10253-4 - Butt-welding pipe fittings - Part 4: Wrought austenitic and austenitic-ferritic (duplex) stainless steels with specific inspection requirements
  • EN 10272 - Stainless steel bars for pressure purposes
  • EN 10296-2 (2005) - Welded circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel
  • EN 10297-2 (2005) - Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel

X1NiCrMoCu25-20-5,1.4539,AISI 904L,N08904 steel is used for the production of systems and equipment for the desalination of water, equipment and machinery in the food, cryogenic and pharmaceutical industries, the production of scrubbers in coal-fired powe

Chemical composition(wt.%) of X1NiCrMoCu25-20-5, 1.4539, AISI 904L, N08904 grade: to EN 10028-7

Elements Min.(≥) Max.(≤) Similar Remarks
C - 0.020
Si - 0.70
Mn - 2.00
P - 0.030
S - 0.010
Cr 19.00 21.00
Mo 4.00 5.00
Ni 24.00 26.00
N - 0.15
Cu 1.20 2.00

Mechanical properties of grade X1NiCrMoCu25-20-5, 1.4539, AISI 904L, N08904 grade: to EN 10028-7

Yield Strength,Rp 0.2(MPa)

Condition Min Max Similar Note
230

Tensile Strength,Rm(MPa)

Condition Min Max Similar Note
530 570

Impact,Kv/Ku(J)

Condition Min Max Similar Note

Elongation,A(%)

Condition Min Max Similar Note
35

Reduction of area,(%)

Condition Min Max Similar Note

Hardness

Condition Type Min Max Similar Note
HB 230

Physical properties of grade X1NiCrMoCu25-20-5, 1.4539, AISI 904L, N08904 EN 10028-7

Modulus of elasticity,E Note
195 GPa
Heat capacity, cp20℃ Note
450 J * kg-1 * K-1
Heat conductivity, λ Note
12 W * m-1 * K-1
Linear Expansion Factor, α20℃ Note
15,8 * 10-6 K-1
Specific resistance Note
1 Ω * mm2/m

X1NiCrMoCu25-20-5, 1.4539, AISI 904L, N08904 - Detail

Seamless circular steel tubes for mechanical and general engineering purposes - Technical delivery conditions - Part 2: Stainless steel, X1NiCrMoCu25-20-5,1.4539,AISI 904L,N08904 used mainly in the chemical, energy and petrochemical industries, X1NiCrMoCu25-20-5,1.4539,AISI 904L,N08904 steel is used for the production of systems and equipment for the desalination of water, equipment and machinery in the food, cryogenic and pharmaceutical industries, the production of scrubbers in coal-fired power plants, condensers, exhaust purification filters, heat exchangers for sea water cooling, shipbuilding, offshore and chemical pipelines, in the steel industry, for paper whitening machines in the cellulose industry.

We can customize the production of X1NiCrMoCu25-20-5, 1.4539, AISI 904L, N08904 grade, contact us for the best solution.
[email protected]