Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | 0.36 | 0.44 | ||
| Si | - | 0.40 | ||
| Mn | 0.45 | 0.85 | ||
| P | - | 0.030 | ||
| S | - | 0.030 | ||
| Cr | 0.90 | 1.20 | ||
| Ni | - | - | ||
| Mo | 0.50 | 0.65 | ||
| Al | - | 0.015 | ||
| V | 0.20 | 0.35 |
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 885 (≥) | 319 (≥) | 23 | 42 | 13 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 322 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 655 (≥) | 668 (≥) | 33 | 13 | 22 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 234 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 231 | 126 | 439 |
We can customize the production of 1.7711 grade, contact us for the best solution.
–sales@specificsteel.com