X6CrNiTi18-10

X6CrNiTi18-10 Stainless Steels to ISO 15510 (2010)

X6CrNiTi18-10 - Specification & Application

  • ISO 15510 (2010) - Stainless steels -- Chemical composition
  • ISO 16143-1 (2004) - Stainless steels for general purposes -- Part 1: Flat products
  • ISO 16143-2 (2004) - Stainless steels for general purposes -- Part 2: Semi-finished products, bars, rods and sections
  • ISO 16143-3 (2005) - Stainless steels for general purposes -- Part 3: Wire
  • ISO 9327-5 - Steel forgings and rolled or forged bars for pressure purposes - Technical delivery conditions - Part 5: Stainless steels
  • ISO 9328-5 - Steel plates and strips for pressure purposes - Technical delivery conditions - Part 5: Weldable fine grain steels, thermomechanically rolled
  • ISO 9328-7 (2011) - Steel flat products for pressure purposes - Technical delivery conditions - Part 7: Stainless steels
  • ISO 9329-4 - Seamless steel tubes for pressure purposes - Technical delivery conditions - Part 4: Austenitic stainless steels
  • ISO 9330-6 - Welded steel tubes for pressure purposes - Technical delivery conditions - Part 6: Longitudinally welded austenitic stainless steel tubes
  • ISO/TS 15510 (2003) - Stainless steels - Chemical composition

Stainless steels - Chemical composition

Chemical composition(wt.%) of X6CrNiTi18-10 grade: to ISO 15510 (2010)

Elements Min.（≥） Max.（≤） Similar Remarks
C - 0.08
Si - 1.00
Mn - 2.00
P - 0.045
S - 0.030
Cr 17.00 19.00
Ni 9.00 12.00
Mo - -
N - -
Ti 5×C％ 0.70

X6CrNiTi18-10 - Detail

Stainless steels - Chemical composition

Mechanical properties of grade X6CrNiTi18-10 ISO 15510 (2010)

Proof strength
Rp0.2 (MPa)		 Tensile strength
Rm (MPa)		 Impact energy
KV (J)		 Elongation at fracture
A (%)		 Reduction in cross section on fracture
Z (%)		 As-Heat-Treated Condition Brinell hardness (HBW)
875 (≥) 815 (≥) 22 34 14 Solution and Aging, Annealing, Ausaging, Q+T,etc 322

Physical properties of grade X6CrNiTi18-10 ISO 15510 (2010)

Property Density
kg/dm3		 Temperature T
°C/F		 Specific heat
J / kgK		 Thermal conductivity
W/mK		 Electric resistance
µΩ·cm		 Modulus of elasticity
kN/mm2		 Expansion rate
661 (≥) 734 (≥) 42 32 31 Solution and Aging, Annealing, Ausaging, Q+T,etc 313
Temp.
°C/°F		 Creep strain limit
(10000h)
(Rp1,0) N/mm2		 Creep rupture strength
(10000h)
(Rp1,0) N/mm2
716 568 524

Equivalent Grade

1 X6CrNiTi18-10 2 X6CrNiTi18a-10 3 ISO X6CrNiTi18-10 4 X6CrNiTi18 10E 5 ISO X6CrNiTi18-10 Tube 6 ISO X6CrNiTi18-10 Tube 7 EN X6CrNiTi18-10 8 EN X6CrNiTi18-10 9 EN X6CrNiTi18-10 10 EN X6CrNiTi18-10 11 X6CrNiTi18-10 12 1.4541 13 X6CrNiTi18-10 14 1.4541 15 X6CrNiTi18-10 16 X6CrNiTi18 10E 17 X6CrNiTi18-10 18 X6CrNiTi18-10

Equivalent Products

Product shapes we supply:

We can customize the production of X6CrNiTi18-10 grade, contact us for the best solution.
–sales@specificsteel.com