Specification for nickel-chromium-cobalt-titanium- aluminium heat-resisting alloy cold drawn wire for springs and springs (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)
Elements | Min.(≥) | Max.(≤) | Similar | Remarks |
---|---|---|---|---|
C | - | 0.13 | ||
Si | - | 1.00 | ||
Mn | - | 1.00 | ||
P | - | - | ||
S | - | 0.015 | ||
Cr | 18.00 | 21.00 | ||
Ni | - | remaining | ||
Mo | - | - | ||
Co | 15.00 | 21.00 | ||
Ti | 2.00 | 3.00 | ||
Fe | - | 1.50 | ||
Al | 1.00 | 2.00 | ||
Cu | - | 0.20 | ||
Zr | - | 0.15 | ||
B | - | 0.020 | ||
Bi | - | 0.0001 | ||
Pb | - | 0.002 | ||
Ag | - | 0.0005 |
Specification for nickel-chromium-cobalt-titanium- aluminium heat-resisting alloy cold drawn wire for springs and springs (Nickel base, Cr 19.5, Co 18.0, Ti 2.5, Al 1.5)
Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
---|---|---|---|---|---|---|
559 (≥) | 635 (≥) | 24 | 13 | 32 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 442 |
Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
---|---|---|---|---|---|---|---|
973 (≥) | 572 (≥) | 22 | 21 | 24 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 131 | |
Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
315 | 975 | 483 |
We can customize the production of 2HR501 grade, contact us for the best solution.
–sales@specificsteel.com