X15Cr13

X15Cr13 Stainless Steels to DIN 17441 (1985)

X15Cr13 - Specification & Application

• DIN 17441 (1985) - Stainless steels - Technical delivery conditions for cold rolled strips and slit coils strip and sheets cut from such strips for pressure purposes
• DIN EN 10088-1 - Stainless steels - Part 1: List of stainless steels
• DIN EN 10088-2 - Stainless steels - Part 2: Technical delivery conditions for sheet/plate and strip of corrosion resisting steels for general purposes
• DIN EN 10088-3 - Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes

Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes

Chemical composition(wt.%) of X15Cr13 grade: to DIN 17441 (1985)

X15Cr13 - Detail

Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes

Mechanical properties of grade X15Cr13 DIN 17441 (1985)

Proof strength Rp0.2 (MPa)	Tensile strength Rm (MPa)	Impact energy KV (J)	Elongation at fracture A (%)	Reduction in cross section on fracture Z (%)	As-Heat-Treated Condition	Brinell hardness (HBW)
793 (≥)	313 (≥)	21	22	33	Solution and Aging, Annealing, Ausaging, Q+T,etc	414

Physical properties of grade X15Cr13 DIN 17441 (1985)

Property	Density kg/dm3	Temperature T °C/F	Specific heat J / kgK	Thermal conductivity W/mK	Electric resistance µΩ·cm	Modulus of elasticity kN/mm2	Expansion rate
764 (≥)	656 (≥)	21	42	33	Solution and Aging, Annealing, Ausaging, Q+T,etc	144
Temp. °C/°F	Creep strain limit (10000h) (Rp1,0) N/mm2	Creep rupture strength (10000h) (Rp1,0) N/mm2
661	399	799