Rene 41

Rene 41 Stainless Steels to SAE AMS 5399D (2006)

Rene 41 - Specification & Application

  • SAE AMS 5399D (2006) - Nickel Alloy, Corrosion and Heat-Resistant, Investment Castings 52Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti - 1.6Al - 0.006B Vacuum-Melted, Vacuum-Cast, Solution Heat Treated
  • SAE AMS 5545F (2010) - Nickel Alloy, Corrosion and Heat-Resistant, Sheet, Strip, and Plate 54Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti - 1.5Al - 0.006B Vacuum Induction and Consumable Electrode Melted, Solution Heat Treatable Precipitation Heat Treated
  • SAE AMS 5712J (2006) - Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 53Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti - 1.6Al - 0.006B Vacuum Melted, Solution Heat Treated Precipitation Hardenable
  • SAE AMS 5713J (2007) - Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 53Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti - 1.6Al - 0.006B Vacuum Melted, Solution and Precipitation Heat Treated
  • SAE AMS 5800F (2006) - Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire 54Ni - 19Cr - 11Co - 10Mo - 3.2Ti - 1.5Al - 0.006B Vacuum Induction Melted
  • SAE J 467 (1968) - Special Purpose Alloys ("Superalloys")

These products have been used typically for parts requiring high strength up to 1600 °F (871 °C) and oxidation resistance up to 1800 °F (982 °C), but usage is not limited to such applications

Chemical composition(wt.%) of Rene 41 grade: to SAE AMS 5399D (2006)

Elements Min.（≥） Max.（≤） Similar Remarks
Al 1.40 1.60
B 0.0030 0.0100
C - 0.12
Co 10.00 12.00
Cr 18.00 20.00
Cu - 0.50
Fe - 5.0
Mn - 0.10
Mo 9.0 10.50
Ni - Remainder
S - 0.0150
Si - 0.5000
Ti 3.0 3.3

Rene 41 - Detail

Rene 41

Mechanical properties of grade Rene 41 SAE AMS 5399D (2006)

Proof strength
Rp0.2 (MPa)		 Tensile strength
Rm (MPa)		 Impact energy
KV (J)		 Elongation at fracture
A (%)		 Reduction in cross section on fracture
Z (%)		 As-Heat-Treated Condition Brinell hardness (HBW)
686 (≥) 382 (≥) 22 44 41 Solution and Aging, Annealing, Ausaging, Q+T,etc 333

Physical properties of grade Rene 41 SAE AMS 5399D (2006)

Property Density
kg/dm3		 Temperature T
°C/F		 Specific heat
J / kgK		 Thermal conductivity
W/mK		 Electric resistance
µΩ·cm		 Modulus of elasticity
kN/mm2		 Expansion rate
488 (≥) 359 (≥) 31 31 34 Solution and Aging, Annealing, Ausaging, Q+T,etc 241
Temp.
°C/°F		 Creep strain limit
(10000h)
(Rp1,0) N/mm2		 Creep rupture strength
(10000h)
(Rp1,0) N/mm2
235 789 349

Equivalent Grade

1 Rene 41 2 Rene 41 3 Rene 41 4 Rene 41 5 Rene 41 6 Rene 41 7 Rene 41 8 Rene 41 9 Rene 41 10 Rene 41

Equivalent Products

Product shapes we supply:

We can customize the production of Rene 41 grade, contact us for the best solution.
–sales@specificsteel.com