Low Alloy Tool Steel
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | 0.95 | 1.10 | ||
| Si | 0.10 | 0.50 | ||
| Mn | 0.25 | 0.80 | ||
| P | - | 0.030 | ||
| S | - | 0.030 | ||
| Cr | 1.30 | 1.70 | ||
| Mo | - | - | ||
| V | 0.10 | 0.30 | ||
| W | - | - | ||
| Ni＋Cu | - | 0.75 |
Low Alloy Tool Steel
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 968 (≥) | 316 (≥) | 14 | 21 | 32 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 423 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 933 (≥) | 411 (≥) | 21 | 31 | 23 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 331 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 997 | 334 | 896 |
We can customize the production of L3 grade, contact us for the best solution.
–sales@specificsteel.com