Steel tubes for fired heater
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | - | 0.10 | ||
| Si | - | 1.00 | ||
| Mn | - | 1.50 | ||
| P | - | 0.030 | ||
| S | - | 0.015 | ||
| Cr | 19.00 | 23.00 | ||
| Ni | 30.00 | 35.00 | ||
| Cu | - | 0.75 | ||
| Al | 0.15 | 0.60 | ||
| Ti | 0.15 | 0.60 | ||
| Fe | - | remaining |
Steel tubes for fired heater
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 728 (≥) | 264 (≥) | 22 | 14 | 43 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 331 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 655 (≥) | 668 (≥) | 14 | 11 | 11 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 234 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 323 | 889 | 596 |
We can customize the production of NCF800TF grade, contact us for the best solution.
–sales@specificsteel.com