High-Speed Tool Steel
| Elements | Min.（≥） | Max.（≤） | Similar | Remarks |
|---|---|---|---|---|
| C | 0.78 | 0.88 | ||
| Si | 0.20 | 0.50 | ||
| Mn | 0.15 | 0.40 | ||
| P | - | 0.030 | ||
| S | - | 0.030 | ||
| Cr | 3.50 | 4.00 | ||
| Mo | 8.20 | 9.20 | ||
| V | 1.00 | 1.35 | ||
| W | 1.40 | 2.10 | ||
| Co | - | - |
High-Speed Tool Steel
| Proof strength Rp0.2 (MPa) |
Tensile strength Rm (MPa) |
Impact energy KV (J) |
Elongation at fracture A (%) |
Reduction in cross section on fracture Z (%) |
As-Heat-Treated Condition | Brinell hardness (HBW) |
|---|---|---|---|---|---|---|
| 483 (≥) | 797 (≥) | 42 | 12 | 14 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 331 |
| Property | Density kg/dm3 |
Temperature T °C/F |
Specific heat J / kgK |
Thermal conductivity W/mK |
Electric resistance µΩ·cm |
Modulus of elasticity kN/mm2 |
Expansion rate |
|---|---|---|---|---|---|---|---|
| 664 (≥) | 928 (≥) | 32 | 24 | 41 | Solution and Aging, Annealing, Ausaging, Q+T,etc | 241 | |
| Temp. °C/°F |
Creep strain limit (10000h) (Rp1,0) N/mm2 |
Creep rupture strength (10000h) (Rp1,0) N/mm2 |
|||||
| 382 | 466 | 657 |
We can customize the production of T11301 grade, contact us for the best solution.
–sales@specificsteel.com