C250, 250, UNS K92890, 1.6359, Alloy 250 Maraging steel to AMS 6512
C250, 250, UNS K92890, 1.6359, Alloy 250 - Specification & Application
C250 is used for missile and ejector systems, slat tracks and drive shafts.
Chemical composition(wt.%) of C250, 250, UNS K92890, 1.6359, Alloy 250 grade: to AMS 6512
Elements |
Min.(≥) |
Max.(≤) |
Similar |
Remarks |
C |
- |
0.03 |
|
|
Si |
- |
0.10 |
|
|
Mn |
- |
0.10 |
|
|
P |
- |
0.010 |
|
|
S |
- |
0.010 |
|
|
Cr |
- |
0.50 |
|
|
Ni |
17.00 |
19.00 |
|
|
Co |
7.00 |
8.50 |
|
|
Al |
0.05 |
0.15 |
|
|
Mo |
4.60 |
5.20 |
|
|
Ti |
0.30 |
0.50 |
|
|
Cu |
- |
0.50 |
|
|
Fe |
- |
Bal |
|
|
Mechanical properties of grade C250, 250, UNS K92890, 1.6359, Alloy 250 grade: to AMS 6512
Yield Strength,Rp 0.2(MPa)
Condition |
Min |
Max |
Similar |
Note |
|
1724 |
|
|
|
Tensile Strength,Rm(MPa)
Condition |
Min |
Max |
Similar |
Note |
|
1758 |
|
|
|
Impact,Kv/Ku(J)
Condition |
Min |
Max |
Similar |
Note |
Elongation,A(%)
Condition |
Min |
Max |
Similar |
Note |
|
6 |
|
|
|
Reduction of area,(%)
Condition |
Min |
Max |
Similar |
Note |
Hardness
Condition |
Type |
Min |
Max |
Similar |
Note |
|
HRC |
48 |
|
|
|
C250, 250, UNS K92890, 1.6359, Alloy 250 - Detail
C250 is used for missile and ejector systems, slat tracks and drive shafts.
Product shapes we supply:
- Tool Die Steels in the C250, 250, UNS K92890, 1.6359, Alloy 250 Maraging steel grade
- Stainless Steels - Special Steels in the C250, 250, UNS K92890, 1.6359, Alloy 250 Maraging steel grade
- Square and Flat Steel in the C250, 250, UNS K92890, 1.6359, Alloy 250 Maraging steel grade
- Coil Sheet in the C250, 250, UNS K92890, 1.6359, Alloy 250 Maraging steel grade
- Bar and Hollow Bar in the C250, 250, UNS K92890, 1.6359, Alloy 250 Maraging steel grade
- Forgings in the C250, 250, UNS K92890, 1.6359, Alloy 250 Maraging steel grade
- Superalloy in the C250, 250, UNS K92890, 1.6359, Alloy 250 Maraging steel grade
- Tube Pipe in the C250, 250, UNS K92890, 1.6359, Alloy 250 Maraging steel grade
- Non-Magnetic Steel in the C250, 250, UNS K92890, 1.6359, Alloy 250 Maraging steel grade
- Steels of Blade for Steam Turbine in the C250, 250, UNS K92890, 1.6359, Alloy 250 Maraging steel grade