| 1.2311,40CrMnMoS8-6,1.2312,P20,40CMD8 |
Germany DIN |
Tool Steels; Technical Conditions of Delivery |
| X30WCrV9-3, 1.2581, Z30WCV9, H21 |
Germany DIN |
Tool steel for hot work with high content of tungsten according |
| X120Mn12, 1.3401, A128, X110Mn14 |
European EN |
X120Mn12, 1.3401, A128, X110Mn14 High-manganese steels with austenitic structure, characterized by high carbon content - on average 1.00-1.20%, and high Manganese content - approx. |
| 55NiCrMoV7, 1.2714 |
Germany DIN |
The grades are used in the production of forging machine components - forging dies, parts of extrusion presses, hot knives or deburring plates. |
| 1.2250, 45WCrV7, 45WCrV8 |
Germany DIN |
Knife Steel |
| K30960 |
USA UNS |
K30960 |
| 8MnSi |
China GB |
Alloy tool steels |
| 9CrSi5 |
Germany DIN |
Alloyed SiCr steel |
| A723 |
USA AISI |
Heat treatable low alloyed NiCrMo steel |
| 32NiCrMo12-5 |
Germany DIN |
Heat treatable low alloyed NiCrMo steel |
| 1.6655 |
Germany DIN |
Heat treatable low alloyed NiCrMo steel |
| Cr12 |
China GB |
Often used in the manufacture of small bear impact load and wear resistance of high cold cold punching die, punch, shear knife, cold roll, drill sets and wire drawing die, as well as the gauge, model, the CAM pin, eccentric wheel, etc |
| 1.7765 |
France AFNOR |
|
| 32CrMoV12-10 / 32CDV12 |
France AFNOR |
|
| AMS 6481 |
USA AMS |
|
| 32CrMoV12-10 |
Germany DIN |
|
| 32CrMoV12-10 |
European EN |
|
| 1.6957 |
Germany DIN |
Steels for larger forgings for components in turbine and generator installations |
| 26NiCrMoV14-5 |
Germany SEW |
Steels for larger forgings for components in turbine and generator installations |
| BT1 |
UK B.S. |
W series high speed steel |
| 35CrMo8 |
France AFNOR |
NF A 35-590 Tool steels; Replaced by NF EN ISO 4957:2000 |
| Cr2 |
China GB |
Measuring tool cutting tool steel |
| A-2 |
USA AISI |
Applied to the thermosetting plastic mold, the hardened mould as a whole |
| X160CrMoV12 / Z160CDV12 |
France AFNOR |
Cold working alloy tool steels |
| X12M |
Russia GOST |
Cold work die steel, steel hardenability, quenching tempering hardness, wear resistance, strength are higher than the Cr12.Shape is complex, |
| SS 2310 |
Sweden SS |
Cold work die steel, steel hardenability, quenching tempering hardness, wear resistance, strength are higher than the Cr12.Shape is complex, |
| SKD-11 |
Japan JIS |
Mainly used for cold working mold: gauge, die for thread rolling, cutting tool for metal, forming roll, die for press. |
| A 681 D2 |
USA ASTM |
Cold working die steel |
| 1.2083 |
Germany DIN |
Plastic die steel, and a good polishing and excellent wear resistance, is often used to prevent acid plastic mold. |
| X42Cr13 |
Germany DIN |
Tools high alloyed Cr steel |
| 1.2082 |
Germany DIN |
Tools high alloyed Cr steel |
| X21Cr13 |
Germany DIN |
Tools high alloyed Cr steel |
| 1.2884 |
Germany DIN |
High alloyed CrCoW steel |
| X210CrCoW12 |
Germany DIN |
High alloyed CrCoW steel |
| 1.2880 |
Germany DIN |
High alloyed CrCoMo steel |