Z12CN18-10 Air 9160/C Aviation and Aero Steel to AIR 9160 C

Z12CN18-10 Air 9160/C - Specification & Application

  • AIR 9160 C - wrought steels used in aeronautical constructions
  • EN 10088-1 -
  • EN 10151 -
  • EN 10088-3 -

wrought steels used in aeronautical constructions

Chemical composition(wt.%) of Z12CN18-10 Air 9160/C grade: to AIR 9160 C

Elements Min.(≥) Max.(≤) Similar Remarks
C - 0.15
Si - 1.00
Mn - 2.00
P - 0.035
S - 0.025
Cr 17.00 20.00
Ni 8.00 11.00

Mechanical properties of grade Z12CN18-10 Air 9160/C grade: to AIR 9160 C

Yield Strength,Rp 0.2(MPa)

Condition Min Max Similar Note
195

Tensile Strength,Rm(MPa)

Condition Min Max Similar Note
500 700

Impact,Kv/Ku(J)

Condition Min Max Similar Note

Elongation,A(%)

Condition Min Max Similar Note
40

Reduction of area,(%)

Condition Min Max Similar Note

Hardness

Condition Type Min Max Similar Note
HB 230

Physical properties of grade Z12CN18-10 Air 9160/C AIR 9160 C

Modulus of elasticity,E Note
200 GPa
Heat capacity cp Note
500 J ⋅ kg-1 ⋅ K-1
Heat conductivity, λ Note
15 W ⋅ m-1 ⋅ K-1

Related properties

Mechanical properties of cold rolled - Tensile strength, Rm 850 - 1000
Mechanical properties of cold rolled - Elongation, A 25%
Mechanical properties of cold rolled - Tensile strength, Rm 1000 - 1150
Mechanical properties of cold rolled - Elongation, A 20%

Z12CN18-10 Air 9160/C - Detail

Z12CN18-10 Air 9160C wrought steels used in aeronautical constructions

Stainless, non-magnetic spring steel with high carbon content with good ductility delivered in the form of cold rolled tapes, sheets, drawn wires and drawn bars.Designed for springs, spring washers, ropes, flexible connectors, fasteners, aerial parts and other components used in the chemical and food industries such as pump parts, acid tanks, or high temperature springs.1.4310 grade exhibits resistance to amorphous corrosion, but in delivered condition and in the sensitized state it is not resistant to intergranular corrosion. The steel is delivered in a soft and strengthened by cold work condition, exhibiting the following mechanical properties according to user requirements as described. Supersaturation of X10CrNi18-10 grade products is carried out at 1000-1100 ℃. Forging and rolling processes require a temperature of 1200 - 900 ℃.For Austenitic steel 1H18N9, it is similar to X10CrNi18-10 with a slightly narrower carbon range - max 0.12%, thus showing slightly better mechanical properties than 0H18N9 steel according to PN. It is characterized by good durability, compactness, relatively low plasticity, tendency to cold-work hardening, and adequate polishing ability while maintaining resistance to compounds and substances of 0H18N9 steel.Steel is resistant to intercrystalline corrosion if no welding, hot bending, or strengthening by cold work was performed on the product. It also exhibits resistance to compounds contained in fertilizers, nitric acid, aggressive preservatives and various salts. It is not resistant to non-oxidant environments, pitting and contact corrosion (halides), stress corrosion in contact with chlorides and hydroxides.It is used in the food, fruit and vegetable and chemical industries in nitrogen plants for valves, parts of fittings and pumps, the coal industry and the petrochemical industry. Other applications include distillation boilers, agitators, acid tanks, heat exchangers, absorption towers, and pipelines. It shows very good weldability, where no early heating of the product is required. However, after the joining of the components, it is advisable to carry out the supersaturation process to protect the product against intercrystalline corrosion.


Mechanical properties at individual working temperatures:

  • Coefficient of linear expansion α (10-6 ⋅ K-1
    • at the temperature 100℃ = 16
    •  
    • at the temperature 200℃ = 17
    •  
    • at the temperature 300℃ = 17
    •  
    • at the temperature 400℃ = 18
    •  
    • at the temperature 500℃ = 18
  •  
  • Modulus of elasticityE (GPa) 
    • at the temperature 100℃ = 194
    •  
    • at the temperature 200℃ = 186
    •  
    • at the temperature 300℃ = 179
    •  
    • at the temperature 400℃ = 172
    •  
    • at the temperature 500℃ = 165


Equivalent Grade

Equivalent Products

We can customize the production of Z12CN18-10 Air 9160/C grade, contact us for the best solution.
sales@specificsteel.com